Please ensure you are running the latest firmware to get the best from your SnapCam, visit for firmware updates. Disconnect the SnapCam from the PC, and tap once on SnapCam touch panel, the SnapCam will scan the file and write it to system clock.txt file) and name it with the format “set-YYYYMMDD-HHMM”, YYYY, MM, DD, HH, MM represent the year, month and day, hour, minute of existing time. Open the MicroSD file folder, create a file in any format (eg.Connect the SnapCam to a PC as mass storage device (please refer to Section 5.9).Insert a formatted MicroSD Card into the SnapCam.When the SnapCam is used for the first time, or it has been restored to default settings, it is necessary to set the SnapCam’s clock to ensure the captured photo and video files are saved with correct date and time information. The MicroSD Card must be formatted before first time use.

Do not force the MicroSD Card into the slot as this may damage both the scanner and the MicroSD Card. There is only one direction to insert the MicroSD Card into the slot.The SnapCam supports MicroSD Card from 2GB to 32GB Class 6 or higher is recommended. You must insert a MicroSD Card (required, not included) before using the SnapCam. The LED will turn solid GREEN once the SnapCam is fully charged. When the SnapCam is off, the charging time from empty to full is approximately 1.5 hours. First Time UseĬharge the built-in battery before starting to use your SnapCam. Silicon Bumper Protect the camera andĪccessories to make SnapCam wearable.

Snapcam on mac